Marvelous Info About How To Build A Windom Antenna

It is an off centre fed dipole, with 10 feet of vertical radiator.

How to build a windom antenna. Coax fed ocf ‘windom’ antenna. Should you hang the feedpoint at the apex, or hang the center of the. The basic windom is a half wave length long.

It also works fine on all bands above 40m with a tuner, and. I built an 80 meter windom antenna following these instructions. The differences between the new carolina windom antenna and windom?s original is that the original windom is not a dipole.

(i have ignored the warc bands for simplicity) but, first,. As i understand things, i have to. The development of the windom antenna was done by loren windom (w8gz), who was a prominent american ham in the 1920s.

If you want to experiment with dipole antennas, why not try designing, building, and using the classic windom antenna? Homemade carolina windom antenna. Coax fed ocf ‘windom’ antenna.

Here is my home hf antenna. The first step in constructing my carolina windom was to cut the antenna wire to length for an 80 meter version. It needs no tuner on 40m, 20m and 10m.

The horizontal wires (50 feet and 83 feet) are already assembled to the impedance matching transformer. Enter the new carolina windom. Nebojsa kovacevic has done an excellent job of presenting the advantages and disadvantages of the classic windom antenna.

It's a grounded vertical wire connected to a horizontal portion acting as a top hat capacitance. It is an off centre fed dipole, with 10 feet of vertical radiator. It was intended to be used on.

The page describes a windom antenna with a 6:1 homebrew transformer. I used these measurements from radioworks, who sell pre. However, since negotiating with my neighbours the antenna presently in use here is an 807.